Home > Simpson Strong-Tie > Connectors > Cold-Formed Steel Connectors > Drift Connectors > DSSCB Bypass Framing Drift Strut Connector > Simpson Strong-Tie DSHS-R100 Drift Strut Horizontal Stop DSSCB Bypass Framing Drift Strut Connector (100 ct)

Home > Simpson Strong-Tie > Connectors > Cold-Formed Steel Connectors > Drift Connectors > DSSCB Bypass Framing Drift Strut Connector > Simpson Strong-Tie DSHS-R100 Drift Strut Horizontal Stop DSSCB Bypass Framing Drift Strut Connector (100 ct)


Simpson Strong-Tie DSHS-R100 Drift Strut Horizontal Stop DSSCB Bypass Framing Drift Strut Connector (100 ct)

Item #:DSHS-R100
Retail:$101.97
Quantity:
Simpson Strong-Tie DSHS-R100 Drift Strut Horizontal Stop DSSCB Bypass Framing Drift Strut Connector (100 ct)

Simpson Strong-Tie DSHS-R100 Drift Strut Horizontal Stop DSSCB Bypass Framing Drift Strut Connector (100 ct)


The solution to accommodate building drift, the DSSCB, is used to support cold-formed steel bypass framing to the edge of a floor slab. The DSSCB also simplifies installation by allowing installers for panelized construction to install finished panels while working off the top of the slab without the need to predrill or preinstall anchors for each clip. It also eliminates the coordination difficulties associated with pre-anchorage of standard bypass clips. With pre-punched slots and round holes, the DSSCB is a dual-function connector that can be used for slide-clip and fixed-clip applications.


Features


  • The clips come in lengths of 3-1/2", 6" and 8".
  • Pre-punched slots provide a full 1" of both upward and downward deflection.
  • Precision-manufactured shouldered screws, provided with DSSCB connectors, are designed to prevent overdriving and to ensure the clip functions properly.
  • Works with 13/16" and 1-5/8" strut channels as given in the accompanying figures. Common manufactured brands are UnistrutŽ, PHD and B-Line. Struts are not supplied by Simpson Strong-Tie.
  • The maximum slide-clip standoff distance is 3-1/16" for 13/16" struts, 3-7/8" for 1-5/8" struts and 2-1/4" for concrete inserts.
  • Depending on the application and the designer’s specifications, struts can be either mechanically anchored, welded or cast in place.
  • Pre-engineered design solutions are provided for channel strut anchorage.
  • Tabulated design values are based on assembly testing to mitigate risk for designers, engineers and architects.
  • Optional precast concrete inserts for flush mounting.
  • Optional drift stopper, DSHS, for clip alignment flexibility (where drift not required).


    Material


  • DSSCB - 97 mil (12 ga.), 50 ksi; DSHS - 97 mil (12 ga.), 33 ksi


    Finish


  • Galvanized (G90)


    • E-commerce by Yahoo!