Aerosmith Fastening Systems ACR-10 Sure-Set® Epoxy Acrylate (Acrylic) 10 oz (12/Box)
At Aerosmith Fastening Systems, your health and safety on the construction site, is job one. That’s why we ensure that all the adhesives we sell carry the highly recognized ICC-ES and IAMPO Certified Approvals. What this means is that these products have gone through extensive and rigorous testing to not only ensure product quality, but more importantly when used appropriately, perform as intended with your safety and the safety of others at the forefront.
Product Information
The Sure-Set® ACR is the most environmentally friendly resin system within our range, at the same time it exhibits outstanding performance in concrete, masonry, and other base materials. It is ideally suited for high load/heavy duty structural anchoring applications. It can be used with threaded rod, reinforcing bar, and steel dowels in solid base materials or in conjunction with an Aerosmith screen tube for hollow based anchoring applications. It is free of styrene’s, the Sure-Set® ACR formulation has a very low odor and is well suited for use indoors and in confined spaces. It also has a very low VOC content and no hazard symbols are required to be displayed on the product label, nor it is hazardous for any mode of transportation.
The Sure-Set® ACR has not only been evaluated by IAMPO, it has also been fire tested and has received fire resistance classification F120 (for use with threaded bars) & F240 (for use with rebars). For those operating in markets where American building codes are recognized, ACR can offer Evaluation Service Report from IAPMO ER-668.
Suitable for installation in CRACKED CONCRETE, UNCRACKED CONCRETE, REINFORCED CONCRETE & STONE.
Applications
For use in structural applications in cracked and uncracked concrete (category 1) for threaded rod, reinforcing bars, and steel dowels
Suspended ventilation systems
Safety barriers
Machinery & heavy machinery
Rolling cranes
Structural steel to concrete applicationsImportant Information
Is approved and listed for cracked and uncracked concrete category 1
Can be used in low and high strength concrete
Product is styrene free
Can be used in dry and wet environments
Can be used overhead with epoxy resin stoppers
Product has been seismic tested
Product is fire resistant
Product has a low odor formulation and can be used in both indoor and outdoor applications
Product mixes through dispensing nozzle, no premixing requiredBase Material
Concrete
Concrete
Solid & hollow masonry (If using in hollow base material applications a stainless steel or nylon screen tube is needed to encapsulate the adhesive)
Hard natural stone
Solid rock
Voided stone or rockApprovals and Listings
IAPMO ER-668 For use in Cracked and Uncracked Concrete category 1
IBC Listed (International Building Code)
IRC Listed (International Residential Code)
FBC Listed (Florida Building Code)
FRC Listed (Florida Residential Code)
COLA Listed (City of Los Angeles)
Tested in accordance with AC308 and AC58 for use in structural concrete and masonry