Home > Simpson Strong-Tie > Connectors > Cold-Formed Steel Connectors > Deflection Connectors > SCHA Slide-Clip Connector for Horizontal Anchorage


SCHA Slide-Clip Connector for Horizontal Anchorage

SCHA Slide-Clip Connector for Horizontal Anchorage

The SCHA connector is an ideal solution for panelized or stick-frame construction where the CFS framing anchors to the top of a concrete floor slab or the bottom of a steel beam. The connector features a wide support leg to decrease eccentricity on anchors and provide a variety of anchorage options. The included SCVS vertical slider helps to strengthen the connector for the highest tension (F2) and compression (F3) loads in the industry.

Features

  • Provides a full 1" of both upward and downward movement
  • Tabulated design values for anchorage help mitigate risk and provide ease of specification
  • Either face of anchorage leg can be used against the support
  • Accommodates standoff distances up to 4 3/4"
  • Can be used with 3 5/8", 4", 6" and 8" studs
  • Pre-punched anchor holes accommodate 1/4"-diameter Titen HD® or other 1/4"-diameter concrete screw anchors, and 0.157"-diameter powder-actuated fasteners such as the Simpson Strong-Tie® PDPAT-62KP
  • Pre-punched anchor holes also eliminate the need for predrilling and help ensure accurate anchor placement
  • US Patent 10,273,679

    Material

  • SCHA — 118 mil (10 ga., 33 ksi); SCVS — 97 mil (12 ga., 33 ksi)

    Finish

  • Galvanized (G90)
    • Simpson Strong-Tie SCHA10.75-KT15 10.75 HORIZ SLD CLIP- RIGHT W/SCVS 15PAK (1/Pack)
    Simpson Strong-Tie SCHA10.75L-KT15 10.75 HORIZ SLD CLIP- LEFT W/SCVS 15PAK (1/Pack)
    Simpson Strong-Tie SCHA10.75-KT15 10.75 HORIZ SLD CLIP- RIGHT W/SCVS 15PAK (1/Pack)

    $257.78

    Simpson Strong-Tie SCHA10.75L-KT15 10.75 HORIZ SLD CLIP- LEFT W/SCVS 15PAK (1/Pack)

    $257.78



    E-commerce by Yahoo!