Home > Simpson Strong-Tie > Restoration Solutions > CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant

Home > Simpson Strong-Tie > Anchoring & Fastening Systems for Concrete and Masonry > Restoration Solutions > CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant


CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant

CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant

CIP-LO is a low-odor, fast-curing epoxy paste-over used to seal cracks and secure injection ports at the surface of concrete substrates prior to implementing an epoxy or urethane foam injection repair. When properly mixed, the product will be a uniform gray color. CIP-LO sets up rigid. When the crack repair is complete, the paste-over may be left in place or else ground or chiseled off the concrete substrate.

Features

  • 1:1 two-component, high-solids, epoxy amine based adhesive
  • Non-sag paste consistency for horizontal, vertical or overhead applications
  • Fast cure times for shorter times between paste-over and injection
  • Low-odor formulation
  • Strong substrate bond; requires chipping to remove
  • Gel Time — 6 minutes at 72°F (22°C), 28 minutes at 40°F (4°C)
  • Cure Time — 75 minutes at 72°F (22°C), 2 hours at 60°F (16°C) and 4–5 hours at 40°F (4°C)
  • Volatile organic compound (VOC) — 4 g/L
  • Manufactured in the USA using global materials

    Applications

  • Crack Repair: Structural
  • Crack Repair: Non-Structural
  • Water / Wastewater Facilities

    Includes

  • EMN22i mixing nozzle
    • Simpson Strong-Tie CIPLO22 CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant - Low-odor crack-injection paste-over, 22 oz. cartridge
    Simpson Strong-Tie CIPLO2KT Low-Odor Crack-Injection Paste-Over, 2-Gallon Kit
    Simpson Strong-Tie CIPLO22 CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant - Low-odor crack-injection paste-over, 22 oz. cartridge

    $54.08

    Simpson Strong-Tie CIPLO2KT Low-Odor Crack-Injection Paste-Over, 2-Gallon Kit

    $271.20



    E-commerce by Yahoo!